Shanghai Conhon Electronic&Technology Co.,Ltd.
CONSTANT HONOR
Add to Cart
Load cell sensor Zemic Nickel plated alloy steel IP66 single point load cell H6F
Bending beam
Suitable for belt, platform and other electronic weighing devices
Maximum platform size:
for 50kg-200kg: 400 x 400 mm
for 250kg-500kg: 600 x 800 mm
for 750kg-2t: 1200 x 1200 mm
| Available models | ||
| Capacity | Accuracy | Full article description |
| 100kg | C3 not approved | H6F-C3-100kgkg-3B6 |
| 150kg | C3not approved | H6F-C3-150kg-3B6 |
| 200kg | C3not approved | H6F-C3-200kg-3B6 |
| 250kg | C3 | H6F-C3-250kg-3B6 |
| 500kg | C3 | H6F-C3-500kg-3B6 |
| 750kg | C3 | H6F-C3-750kg-3B6 |
| 1000kg | C3 | H6F-C3-1000kg-3B6 |
| 2000kg | C3 | H6F-C3-2000kg-3B6 |
| Specification | |||||||
| Accuracy class | C3 OIML R60 C3 | ||||||
| Maximum capacity ( Emax ) | kg | 100/150/200/250 300/500/1000/2000 | |||||
| Maximum number of load cell intervals ( nLC ) | 3000 | ||||||
| Ratio of minimum LC verification interval Y = Emax / vmin | 10000 | ||||||
| Combined error | %FS | ±0.023 | |||||
| Output sensitivity ( = FS ) | mV/V | 2.0±0.2 | |||||
| Input resistance | Ω | 400±20 | |||||
| Output resistance | Ω | 350±3.5 | |||||
| Insulation resistance | MΩ | ≥ 5000(50VDC) | |||||
| Zero balance | %FS | ≤ ±1.0 | |||||
| Compensated temperature | ℃ | -10~+40 | |||||
| Operating temperature | ℃ | -35~+65 | |||||
| Excitation, recommended voltage | V | 5~12 (DC) | |||||
| Excitation maximum | V | 18 (DC) | |||||
| Safe overload | %FS | 150 | |||||
| Ultimate overload | %FS | 300 | |||||
| Corner correction | 0.02%load value/100mm | ||||||
| ATEX class( optional ) | II1G Ex ia IIC T4 | II1D Ex iaD20 T73℃ | II3G Ex nL II C T4 | ||||
| Ingress protection (according to EN 60529) Stainless steel | |||||||
| 60529) IP67 Recommended torque on fixation IP67 | |||||||